about about shops fave blogs features tutorials

Tuesday, March 12, 2013

Fabric Bandaids and fused plastic carrying case tutorial

Remember this little one?   She will be one years old on  April 4th.  The little munchkin started walking at  10 months!!  Time to get mommy ready for the challenges of toddler hood. 
 
For today's tutorial I will show you how to make pretty band aids covered with fabric and a fused plastic carrying case.

Material needed:
band-aids
fabric scraps
glue dots or double sided tape
scissors

Step 1:  Cut out a piece of fabric a bit bigger than the band-aid

Step 2:  Place three dots of glue on the band-aid.   Center the middle one in the middle of the band-aid and the other two try to place them as close to the edge as possible (in this picture I didn't so my bad) or use double sided tape.

Step 3:  Place the fabric on top of the glue dots (or double sided tape) and cut around the edge.

You have a pretty band-aid now!

Or more! 

Now for the carrying case
Materials:
iron
scissors
plastic bag (the thin kind you get at the supermarket works best)
*parchment paper, wax paper, or regular paper
piece of velcro (I forgot to take a picture)

*I am using brown bags, it really does not matter what kind of paper you use but it is very important that the paper  is larger than the size of the plastic you want to fuse.

Step 1:  Prepare the plastic bag by flattening it, trim out the handles and bottom of the bag

Step 2:  If the bag has printing turn it inside out and fold it so that you have an 8 ply piece.

Step 3:    Sandwich the 8 ply plastic bag between two sheets of paper.  Do this in a well ventilated area.  Start with a medium setting, move the iron around, don't keep it in one place, make sure you get the edges.    Every 10 to 15 seconds turn the 'sandwich' over and keep ironing.  Make sure you do not iron the bag, you do not want to mess it up.  I am not responsible for your irons ladies!!   You can also check in between the layers to see how it's coming and you can decide to turn up the heat if you like.   But be careful because the plastic gets very HOT! Basically you do not want any bubbles and if you see any iron some more.

You will end up with a sort of plastic fabric very sturdy and durable also easy to clean.  I've been carrying in my purse a little coupon holder  made out of this material for the longest time.

I am not going to lie to you.  Chances are will mess up the first time you try this ( If you don't Starbucks is on me!  Let me know please).  I messed up the first time I tried it!  I am not undermining your ironing capabilities, but this is a thing you have to get a feel for.

Cut it in a trifold wallet size to fit the band aids.  Sew around the edges and place the velcro as closures.

NOTE:  you may say "Wait a minute this bag is not the same as the one on the first pictures." No, it is not!! I messed up on the first bag; not on the ironing part but I cut it the wrong size to fit the band-aids :/

This will make a great little handmade gift or you may keep it in your purse for yourself.  Because really a boo boo will feel better in a pretty band-aid.  Please seek medical attention if it's more serious than a boo boo. Please.

4 comments:

  1. Aaaaaaah! This is SO cute! And perfectly timed too -- I'd actually been thinking about how to make a visible Band-Aid pretty.

    ReplyDelete
  2. These are so adorable Claudia! Very creative!!! I love the fabric covered Band-Aids.

    ReplyDelete
  3. Love your ideas & tutorials!!! Keep them coming.

    ReplyDelete
  4. Love this!! Definitely going to try this :)

    xoxo

    ReplyDelete

your comments put a smile on my face go ahead leave one! :)

 
@moncy3.com 2009-2016